Plug-End – P-Style Extension Spring For One-Piece Garage Doors

Plug-End – P-Style Extension Spring For One-Piece Garage Doors

Pricing is available for dealers only.

Clear

To purchase this product please contact your local dealer.Locate a Dealer     Become a Dealer

SKU: PLUG-END-SPRING Categories: ,

Description

Plug-End – P-Style Extension Spring For One-Piece Garage Doors | Plug-End – P-Style Extension Spring For One-Piece Garage Doors are metal coils for lifting and tensioning assemblies for opening and closing garage doors. It’s primary application is for the E900-R Tension-Spring Assembly.  This family of springs provides the key mechanical tension required to lift single-panel, tilt-up garage doors.  Crafted with tolerances of 1/100ths of an inch, these are designed to safely and reliably provide long-term, smooth open and close.

These 28 to 32 inch (uncoiled length) springs have an attached closed-end loop, greatly enhancing the security of the hooks used in the tensioning mechanism to anchor the spring.   Large, worn-out extension springs will affect every part of a garage door’s operation and can be dangerous.  Replacing all springs at same time is highly recommended to ensure smooth lift and operation of door.

PRODUCT HIGHLIGHTS | SPECS | TECHS
  • Safety-minded replacement or upgrade tension spring for one-piece garage doors
  • Rated for 9000 cycles of operation
  • Change-out of C or W-Hooks used for joining springs to larger mechanism is recommended
  • 97509800 C-Hook for single spring set ups
  • CW15 W-Hook for double spring set ups
  • Variety of sizes and compatibilities


HOW TO DETERMINE YOUR WIRE SIZE:

  • Letter: style of spring closure/hook (P means plug-end)
  • 1st Number: gauge or size of wire
  • Final 2 Numbers: these tell the length of the spring
  • If the label on your spring is missing:
  • Use calipers or a tape measure 10 rows of coils and divide total by 10; this will be measurement to select in the drop-down menu in cart
Available sizes (see drop down)
  • P728 – 28 in. Plug-End Spring (.177 in. #7 Wire)
  • P728L – 28 in. Low Tension Plug-End Spring (.177 in. #7 Wire)
  • P730 – 30 in. Plug-End Spring (.177 in. #7 Wire)
  • P528 – 28 in. Plug-End Spring (.207 in. #5 Wire)
  • P928 – 28 in. Plug-End Spring (.148 in. 9-Gauge Wire)
  • P732 – 32 in. Plug-End Spring (.177 in. #7 Wire)
  • P328 – 28 in. Plug-End Spring (.244 in. #3 Wire)

= = = = = = = = = = = =
DOCS
1-PIECE-SPRING-INSTALL--MANUAL-2.pdf (5 downloads)

ONE-PIECE-SPRING-HRDWRE-ASSY--MANUAL.pdf (7 downloads)

You may also like…