Tucker Auto-Mation MUSTANG 1P PACKAGE Automatic Door Opener Kit (DOUBLE)

Special Low Energy Packages for PAIR of Operators by Tucker Auto-Mation are now available to order directly from North Shore Commercial Door. The Mustang 1P Low Energy Package includes one (1) double width, CLEAR LE (Low Energy - SW19) Operator & two (2) TORPEDO-ONE Presence Sensors.

LOW ENERGY (SW19) SINGLE OPERATOR INFORMATION

Tucker Auto-Mation Swing Door Operators for double doors are state-of-the-art micro-processed controllers with electro-mechanical drives. Transform your double swinging door into a non-handed (RH or LH), automatic door. All-in-one entrance solution (reduced stock to carry on service/installation vans - one operator fits all applications). The unique, slim-line design offers non-handed (left or right handed opening) operation, full mechanical stops and a variety of interface options for sensors, push plates, fire alarms, and electric locks. Extremely quiet/silent operation. On-board diagnostics/LED indicators for each input simplify the troubleshooting process and help quickly isolate wiring errors. Tucker Advanced Programmer (TAP) is provided as an option to access additional programming features. Operator defaults are set at the factory. Self-learning and self-tuning operator can be installed and functional in just minutes. Operator automatically adjusts as needed for smooth, seamless operation. One-button initial setup to calculate operating force, torque, check speed and check duration. Setup for low-energy applications is a "Flip of the Switch" (dip 5). Setup for inhibiting the stall signal near full-open position is a "Flip of the Switch" (dip 7). The operator will reverse upon contact with an obstruction.

Choice of spring or power close (please specify preferred CLOSE method by selecting SPRING or POWER in the drop-down menu above). SW19 can be configured for a surface mounted push or pull arm application (please specify preferred ARM STYLE by selecting PUSH or PULL in the drop-down menu above). Fully compliant with all US and Canadian ADA requirements. Compliant with ANSI A156.19 & A156.10 standards. UL - Certified for use as fire door operators (3-hour rating). Powder coated steel end caps.

Complete Field Replaceable Unit:

If the unit ever fails, Tucker Auto-Mation will replace the whole operator assembly which includes all components mounted on the short back-plate. There is no need for in-depth troubleshooting or timely "piece" replacement. THREE YEAR WARRANTY ON PARTS

***Please Note: Operators are 3" wider than the width of the door to allow for the jambs.

Double Width (DOUBLE-W) Door to Operator Sizing (please specify preferred door/operator WIDTH in the drop-down menu above):

• 72" Door = 75" Operator Width (1905 mm)
• 84" Door = 87" Operator Width (2210 mm)
• 88" Door = 91" Operator Width (2311 mm)
• 96" Door = 99" Operator Width (2514 mm)

Non-Handed Operator Highlights:

• RH or LH
• Inswing or Outswing
• Push Arm or Parallel Arm w/Slide Track
• Telescoping Push Arm Assembly to Accommodate Deep Reveals

Push Arm Application:

• Bottom of header is 1/4" below bottom of frame
• The motor of the operator is towards the lock jamb

Pull Arm Application:

• Bottom of header is 1-3/8" up from bottom side of top frame
• The motor of the operator is towards the hinge

Arm Extension:

• Available for larger reveals

Low Energy (SW19) Double Operator Highlights:

• MIN 5 Seconds from Close to Open
• Stay Open for 5 Seconds - Up to 30 Seconds
• Force: 15 lbs - (6.8 kg)
• Push or Pull (In Door Out Swing)
• Activation: Knowing Act (Push Plates)
• Door Mounted Safety Device: Optional (Torpedo - One)

IMPORTANT NOTE:

• Upon completion of the arm assembly be sure to adjust mechanical door stops before powering/activating the operator

TORPEDO-ONE PRESENCE SENSOR INFORMATION

-Tucker Auto-Mation offers Low Energy Packages for double swinging doors, available through North Shore Commercial Door.
-The Mustang 1P Low Energy Package includes a CLEAR LE (Low Energy - SW19) Operator and two TORPEDO-ONE Presence Sensors.
-These state-of-the-art operators can transform double doors into automatic ones with non-handed operation and various interface options.
-The TORPEDO-ONE Presence Sensor reliably detects objects in the swing path of low-energy automatic doors, enhancing safety.
-These products meet ADA requirements, ANSI standards, and have a three-year warranty on parts.

DIPSWITCH SETTINGS (* = DEFAULT):

SWITCH 1

• Background Suppression*
• Background Analysis

SWITCH 2

• Relay N.O.*
• Relay N.C.

Technical Information: