- Usually Ships 4 to 7 Business Days
EMX
EMX WEL-200R Wireless Edge Link Reciever
- Usually Ships 4 to 7 Business Days
- availability:
- available
Product Description
The WEL-200R Receiver is a part of the WEL-200 Wireless Edge Link System by EMX. The WEL-200 system provides a complete wireless solution for interfacing sensing edges with gate openers and garage door operators. Wireless edge link eliminates the wiring between the safety edge and operator control box ensuring compliance with 2018 UL325 monitoring standards. The WEL-200 operates up to 200 feet line of sight between transmitter and receiver. The receiver connects with up to four transmitters with separate relay and pulse outputs for open and close edge functionality.
The WEL-200R Receiver is equipped with enhanced diagnostic features that makes it easy to install and maintain. Feedback is provided for all fault modes, including edge open and short conditions, low battery and failed transmitters. The WEL-200R receiver supports all common monitoring methods, including normally closed (NC), resistive termination (10K) and pulse output.
Features:
Wireless Edge Link Receiver
Interface sensing edges with gate and door operators
Eliminates the need to wire between safety edge and garage door operator
UL325-2018 compliant
Operating range up to 200 ft.
Operating frequency of 915 MHz
NEMA 4X enclosures
Receiver Specs
Operating range: Up to 200 ft. (line of sight)
Operating frequency: 915 MHz
Response time: 100ms
Power/fault indicator: Red power LED/green channel LED
Channel status indicator: Green LED
Channel mode selection switch: Assign each channel to OPEN/CLOSE function
Outputs:
OPEN relay: Form C contacts (NO, COM, NC)
CLOSE relay: Form C contacts (NO, COM, NC)
OPEN pulsed: Open collector transistor output (opto-isolated)
CLOSE pulsed: Open collector transistor output (opto-isolated)
Resistive termination: 10K ohm across NO contact (jumper selectable)
Power protection: Thermal fuse, MOV
Environmental rating: NEMA 4X
Power supply: 12-24 VAC/VDC
Battery life: NA
Current draw: 50 mA
Operating temperature: -40° ...60°C (-40° ...140°F)
Dimensions (L x W x H): 140mm (5.5”) x 34mm (1.3”) x 90mm (3.5”)
Weight: 200g (7 oz.)
Connections: 12 terminals (18-26AWG)