EMX

EMX Raven Microwave Pedestrian and Vehicle Motion Sensor

SKU:
141-0004
Write a Review
  • Usually Ships Following Business Day
availability:
available
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

The RAVEN is a vehicle motion sensor that uses microwave technology to activate automatic doors and industrial gates. The sensor distinguishes between vehicles and pedestrians through dual relay outputs.

Featuring multiple detection modes, the sensor can be programmed to approach-only, depart-only or bidirectional movement. The RAVEN will eliminate unnecessary door openings by utilizing cross traffic filtering settings. Other parameters can be configured to adjust the sensitivity, responsiveness and relay hold time. Programming can be done using the push buttons directly on the housing or by the optional RAVEN-RC remote control.

Advantages:

  • Disregard pedestrian and parallel traffic

  • Flexible adjustment of the detection field

  • Reduce door openings to save energy

  • Indoor and outdoor use

APPLICATIONS:

  • Activation of automatic industrial doors

  • Truck and tow-motor detection

  • Cold storage facilities

  • Barrier arm activation

  • Parking garage and car wash entrances

FEATURES:

  • Advanced K-band microwave technology with adjustable detection field

  • Differentiate between pedestrian and vehicle traffic for energy efficient door openings

  • Uni-directional and cross-traffic filtering technology

  • Durable, waterproof IP67 housing for harsh environments

  • Flexible configuration with integrated push buttons or optional remote control

SPECS:

Operating Frequency

24.150 GHz

Detection Range

Dependent on sensor height and housing angle Max. detection range of 23 ft (7 m) x 23 ft (7 m) at an installation height

Vertical Directionality

+/- 90° in 15° increments (up/down)

Horizontal Directionality

+/- 18° (left/right)

Mounting Height

8-23 ft (2.5-7 m)

Power

12-36 VDC or 12-28 VAC

Current Draw

50 mA @ 24 VDC

Relay Output

2 relay outputs (vehicle & pedestrian) NO/NC

Relay Hold Time

0.5 to 300 seconds (adjustable)

Relay Contact Rating

1 A @ 24 VDC/AC

Operating Temperature

-4° to 140°F (-20° to 50°C) below 90% relative humidity

Dimensions (W x H x D)

With mounting bracket – 5.16” (131 mm) x 2.87” (73 mm) x 5.35” (136 mm)

Connection

26 ft (8 m) cable

Housing Material

Polycarbonate

Weight

1.4 lbs (650 g) with cable

Environmental Rating

IP67

Product Manual

Product Manual

Product Manual