Miller Edge RB-P-K10C RBAND Monitored Wireless Edge System for Doors

Write a Review
  • Usually Ships 4 to 7 Business Days
Product Type:
Wireless Transmitter/Receiver
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

Miller Edge RBand for doors is a monitored wireless sensing edge transmitter/receiver system that provides wireless connection between a monitored sensing edge and a motorized garage door operator. Remove the wiring between your sensing edge and door to streamline any installation with this wireless solution from Action Industries. RBand is designed for commercial doors and has pulsed output for compatibility with most commercial door operators manufactured after 2010. The RBand receiver can pair with three transmitters to work with up to three separate garage door sensing edges or operators. Miller Edge manufactures their RBand products with durability to work in rugged industrial environments, and they are equipped with on-board diagnostics for easy set up and troubleshooting. RBand for doors offers pulsed and normally open outputs, making integration with existing systems easy. This system meets the UL325 requirements for monitored devices and has been certified as a UL 325 Recognized Component. It is designed for use with operators that comply with UL 325 using a Miller Edge 10K sensing edge. This wireless safety edge system is designed specifically for garage doors. For a wireless gate safety edge system Miller Edge manufactures the RBand Monitored Wireless Gate Edge System.


  • Configured for Commercial motorized doors

  • Easy to set up and configure

  • Bi-directional link improves immunity to RF interface

  • Receiver is compatible with up to three wireless transmitters

  • On-board diagnostics for easy setup/troubleshooting

  • Monitored system ideal for commercial door operators manufactured after August 2010

  • Transmitter built to endure rugged environments

  • UL 325 Recognized Component

  • 2-year warranty

  • Powered by 2 AA batteries

  • Installs below operator for direct wiring

Kit Contents:

  • RBand Edge Transmitter (RB-TX10)

  • RBand Door Edge Receiver (RB-P-RX10)

  • (2) 3.6V AA lithium batteries

  • (4) #6 pan head transmitter mounting screws


Response Time


135 milliseconds

Operating Temperature


-40 Deg F to +140 Deg F (-40 Deg C to +60 Deg C)



916 MHz

Operating Range


50 feet (15.25 m) nominal; 100 feet (30 m) maximum optimal conditions

Agency Approvals


UL 325 Recognized Component






Power Source


12-24 volts AC/DC nominal


(2) AA, 3.6 volts lithium, 2-year expectancy



Output: Pulsed, N.O.


Input: 10K monitored sensing edge





3-5/8”W x 4-1/8”H x 1-5/8”D (93 x105 x 42 mm)


1-13/16”W x 5-3/4”H x 1-3/4”D (46 x 146 x 44 mm)



5.25 oz.


4.5 oz.

Enclosure Material





TX Low Battery Alert




LED Indicators


Outputs 1-2, check





Attached wire


Degree of Protection




Product Manual

Product Manual