P Style Plug End Extension Springs for One Piece Garage Doors

Plug-End - P-Style Extension Spring For One-Piece Garage Doors are metal coils for lifting and tensioning assemblies for opening and closing garage doors. Its primary application is for the E900-R Tension-Spring Assembly. This family of springs provides the key mechanical tension required to lift single-panel, tilt-up garage doors. Crafted with tolerances of 1/100ths of an inch, these are designed to safely and reliably provide long-term, smooth open and close.

These 28 to 32 inch (uncoiled length) springs have an attached closed-end loop, greatly enhancing the security of the hooks used in the tensioning mechanism to anchor the spring. Large, worn-out extension springs will affect every part of a garage doors operation and can be dangerous. Replacing all springs at the same time is highly recommended to ensure smooth lift and operation of the door.

PRODUCT HIGHLIGHTS | SPECS | TECHS

• Safety-minded replacement or upgrade tension spring for one-piece garage doors

• Rated for 9000 cycles of operation

• Change-out of C or W-Hooks used for joining springs to larger mechanism is recommended

• 97509800 C-Hook for single spring setups

• CW15 W-Hook for double spring setups

• Variety of sizes and compatibilities

HOW TO DETERMINE YOUR WIRE SIZE:

• 1st Letter: style of spring closure/hook (P means plug-end)

• 1st Number: gauge or size of wire

• Final 2 Numbers: these tell the length of the spring

• If the label on your spring is missing: Use calipers or a tape measure 10 rows of coils and divide total by 10; this will be measurement to select in the drop-down menu in cart

Available sizes (see drop down)

• P728 - 28 in. Plug-End Spring (.177 in. #7 Wire)

• P728L - 28 in. Low Tension Plug-End Spring (.177 in. #7 Wire)

• P730 - 30 in. Plug-End Spring (.177 in. #7 Wire)

• P528 - 28 in. Plug-End Spring (.207 in. #5 Wire)

• P928 - 28 in. Plug-End Spring (.148 in. 9-Gauge Wire)

• P732 - 32 in. Plug-End Spring (.177 in. #7 Wire)

• P328 - 28 in. Plug-End Spring (.244 in. #3 Wire)